华南俳烁实业有限公司

本地端掛載遠程服務器的磁盤或者分區當成本地磁盤使用，目前有兩臺機器，分別是foundation(服務器端192.168.122.1/24) 和Desktop(終端192.168.122.2/24),先配置服務器端：以RHEL7為例，準備一個分區/dev/sda5

#yum -y install targetcli            //安裝軟件
#systemctl enable target.service    //設置開機自啟
#systemctl start target.service        //啟動服務
#targetcli                            //進入命令行

進入到/> cd backstores/block/目錄，創建后端區域磁盤,名字為back,這里使用的是分區/dev/sda5

/> cd backstores/block/
/> create back /dev/sda5
/backstores/block> cd ../../iscsi/
/iscsi> create iqn.2015-09.com.example:rhce  //創建本地鏈接名稱

進入到tpg1目錄，創建acls,由于只有一個lun0，故這里可以不指定

/iscsi/iqn.20...hce/tpg1/acls>create iqn.2015-09.com.example.foundation:888

進入到luns目錄，創建對應關系

/iscsi/iqn.20...hce/tpg1/luns> create /backstores/block/back

指定端口

create ip_address=192.168.122.1 ip_port=3260

最后的目錄結構為：

/> ls
o- / ................................................................................................... [...]
  o- backstores ........................................................................................ [...]
  | o- block ............................................................................ [Storage Objects: 1]
  | | o- back ...................................................... [/dev/sda5 (2.0GiB) write-thru activated]
  | o- fileio ........................................................................... [Storage Objects: 0]
  | o- pscsi ............................................................................ [Storage Objects: 0]
  | o- ramdisk .......................................................................... [Storage Objects: 0]
  o- iscsi ...................................................................................... [Targets: 1]
  | o- iqn.2015-09.com.example:rhce ................................................................ [TPGs: 1]
  |  o- tpg1 ......................................................................... [no-gen-acls, no-auth]
  |    o- acls .................................................................................... [ACLs: 1]
  |    | o- iqn.2015-09.com.example.foundation:888 ......................................... [Mapped LUNs: 1]
  |    |  o- mapped_lun0 ............................................................ [lun0 block/back (rw)]
  |    o- luns .................................................................................... [LUNs: 1]
  |    | o- lun0 ................................................................... [block/back (/dev/sda5)]
  |    o- portals .............................................................................. [Portals: 1]
  |      o- 192.168.122.1:3260 ......................................................................... [OK]
  o- loopback ................................................................................... [Targets: 0]

接下來配置防火墻

#firewall-cmd --permanent --add-port=3260/tcp --zone=public
#firewall-cmd --permanent --add-port=3260/udp --zone=public
#firewall-cmd --reload

現在將視線轉到desktop端

#yum install iscsi-*
#vim /etc/iscsi/initiatorname.iscsi  //將其中的默認的名字改為服務器端中acls里設置的名字
#systemctl enable iscsi
#systemctl enable iscsid
#systemctl start iscsi
#systemctl start iscsid
#iscsiadm -m discovery -t st -p 192.168.122.1:3260    //發現設備
#iscsiadm --node -l                                    //登陸

登陸成功后fdisk -l即可看到新增的一塊磁盤，接下來可以對磁盤進行格式化和掛載，即可正常使用